Time marches on

Putting things back after taking them apart is just the reverse of taking them out which isn't very exciting so I will skip most of it, this time 

If you are interested take a look at the post https://landroverkaty.blogspot.com/2022/09/fault-finding-and-removals.html and consider doing it all backwards 

The only difference is of course that you are fitting new components and gaskets such as the one that separates the steel of the injector pump from the aluminium of the timing case 

New pulleys and tensioner inside the timing case, new crankshaft oil seal and then set everything in the position that you need for the timing to be correct (there is a pin that fits through the injector pump, a mark on the crankshaft pulley and a notch in the flywheel) and then reassemble the case, fit the crank pulley and the fan pulley (gicing it a hard whatck to ensure that it's on properly) and then the fan belt. Connect everything up again, Check the tappet / valve clearances because the rocker has been off and she's ready to be started.. so how did that go? 

Play the video :)